Business Overview
Every air conditioned or mechanically ventilated building depends on one thing working well out of sight: the ductwork. An air conditioning duct that is the wrong size, badly insulated or made from the wrong material can leave a room stuffy. It can also make the system noisy and expensive to run. Proklima, based in Qormi, supplies and installs ducting and duct fittings for homes, offices, restaurants, shops and factories across Malta. The aim is straightforward: give every space clean, well balanced airflow without any guesswork.
The company offers a full range of ducting materials to suit different budgets and environments. Galvanised steel ventilation duct is one of the most popular choices, since its zinc coating resists rust and copes well with humidity. This makes it a strong fit for busy commercial kitchens, swimming pools and production areas, where moisture and chemicals are part of daily life. For projects that need a Read Morelighter, faster installation, Proklima also supplies phenolic ductwork, a panel based system that combines the duct and its insulation in one product. It improves thermal efficiency while keeping the overall structure light. Round and square aluminium cladding is also available to protect insulated ducting that runs outdoors or through exposed plant rooms. The finish stays neat and durable, even against Malta's sun, salt air and rain.
Good ventilation depends on more than the duct itself. Proklima stocks and fits a wide range of accessories that keep an installation working as intended, including grilles, diffusers, filters, regulators and flexible tubing. Many of these fittings and accessories come from established manufacturers such as Brofer, so customers get tested, branded components rather than unbranded alternatives. Sound attenuators can be added along a duct run to cut down on fan and airflow noise. This matters in offices, restaurants and any space where a quiet working environment is part of the brief. Fire dampers and other fire safety accessories are also available, helping a ducted system meet the safety standards expected of commercial buildings in Malta.
Air leakage is one of the most common faults in older ductwork. A gap or a poorly sealed joint lets air escape before it reaches the room it was meant for. The system then works harder than it should, whether it is cooling, heating or simply moving fresh air around a building. Proklima's duct fittings are designed with air leakage prevention in mind, which helps cooling and heating systems run as efficiently as the equipment connected to them allows.
Ventilation is not limited to ducting alone. Proklima's range of ventilation fans runs from small units for domestic bathrooms through to large fans built for industrial smoke extraction. Weather louvres and flexible ducting round out the range, giving installers and building owners a single source for the parts a ventilation system actually needs.
Restaurants and catering kitchens place some of the heaviest demands on any ventilation system. Grease laden air, high temperatures and constant use call for ducting and extraction that can take the strain. Proklima supplies extraction fan units with carbon filters and pre filters. A choice of kitchen hoods is available too, including wall mounted, island type, extract only and balanced airflow designs. These pair well with galvanised steel ventilation duct, which resists grease, moisture and heat. Together, they help a catering kitchen keep air moving safely, without falling foul of fire or hygiene rules.
Not every duct run fits a standard part straight off the shelf. Proklima's own metal works team fabricates custom sheet metal sections for awkward ceiling voids, tight risers and non standard openings. This means a system can be tailored to the actual building, rather than the other way round. Stock products and in house fabrication work side by side. A job might need a single replacement section of galvanised steel ventilation duct, or it might need a full ventilation network for a new building. Either way, the same team handles design, supply and installation from start to finish.
Proklima was established in 2012 and has since grown into a local name for duct and duct fitting work across Malta's residential and commercial sectors. Years of hands on installation experience, spanning homes, restaurants, retail units and factories alike, have shaped a practical approach to ducting and ventilation. The team chooses the right material for the environment, fits the system properly the first time, and keeps the airflow balanced too. That matters, because the rest of the system, whether air conditioning, heating or extraction, depends on it to work efficiently.
Malta's climate places real demands on ventilation and air conditioning ductwork. Long, humid summers mean systems run for months at a time, while salt laden coastal air can be unkind to untreated metal. Ducting that is properly insulated, correctly clad and finished in a corrosion resistant material such as galvanised steel is built for these conditions. Choosing the right setup helps a system keep performing well long after installation day, which in turn keeps running costs and maintenance call outs down for the building owner.
Anyone planning a new air conditioning installation can get in touch with Proklima in Qormi. The same goes for anyone replacing tired ductwork, or simply hoping to make an existing ventilation system quieter and more efficient. Proklima offers a free consultation, quote and on site visit. The team will look at the space and talk through material options, including galvanised steel ventilation duct, phenolic panels and aluminium cladding. From there, they put together a solution that fits both the building and the budget.